View PSMN008-75P_1297859.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
Rev. 01 -- 18 September 2000 Product specification
1. Description
N-channel enhancement mode field-effect transistor in a plastic package using TrenchMOSTM1 technology. Product availability: PSMN008-75P in SOT78 PSMN008-75B in SOT404 (D2-PAK).
2. Features
s Fast switching s Low on-state resistance s Avalanche ruggedness rated.
3. Applications
s DC to DC converters s Uninterruptable power supplies.
c c
4. Pinning information
Table 1: Pin 1 2 3 mb Pinning - SOT78 and SOT404, simplified outline and symbol Description gate (g)
mb
Simplified outline
mb
Symbol
drain (d) source (s) connected to drain (d)
[1]
d
g
2
MBK106
123
1
3
MBK116
MBB076
s
SOT78
[1] It is not possible to make connection to pin 2 of the SOT404 package.
SOT404 (D2-PAK)
1.
TrenchMOS is a trademark of Royal Philips Electronics.
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
5. Quick reference data
Table 2: Symbol VDS ID Ptot Tj RDSon Quick reference data Parameter drain-source voltage (DC) drain current (DC) total power dissipation junction temperature drain-source on-state resistance VGS = 10 V; ID = 25 A Conditions Tj = 25 to 175 C Tmb = 25 C; VGS = 10 V Tmb = 25 C Typ - - - - 7.9 Max 75 75 230 175 8.5 Unit V A W C m
6. Limiting values
Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VDS VDGR VGS ID Parameter drain-source voltage (DC) drain-gate voltage (DC) gate-source voltage (DC) drain current (DC) Tmb = 25 C; VGS = 10 V; Figure 2 and 3 Tmb = 100 C; VGS = 10 V; Figure 2 and 3 IDM Ptot Tstg Tj IS ISM peak drain current total power dissipation storage temperature operating junction temperature source (diode forward) current (DC) peak source (diode forward) current non-repetitive avalanche energy Tmb = 25 C Tmb = 25 C; pulsed; tp 10 s Tmb = 25 C; pulsed; tp 10 s; Figure 2 and 3 Tmb = 25 C; Figure 1 Conditions Tj = 25 to 175 C Tj = 25 to 175 C; RGS = 20 k Min - - - - - - - -55 -55 - - Max 75 75 20 75 75 240 230 +175 +75 75 240 Unit V V V A A A W C C A A
Source-drain diode
Avalanche ruggedness EAS unclamped inductive load; ID = 75 A; tp = 0.1 ms; VDD 15 V; RGS = 50 ; VGS = 10 V; starting Tj = 25 C; Figure 4 unclamped inductive load; VDD 15 V; RGS = 50 ; VGS = 10 V; Figure 4 - 360 mJ
IAS
non-repetitive avalanche current
-
75
A
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
2 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
120
03aa11
03ad10
120 Ider (%) 80
Pder 100 (%) 80
100
60
60
40
40
20
20
0 0 25 50 75 100 125 150 175 Tamb (oC)
0 0 25 50 75 100 125 150 175 200 Tmb (oC)
P tot P der = ---------------------- x 100% P
tot ( 25 C )
VGS 10 V ID I der = ------------------ x 100% I
D ( 25 C )
Fig 1. Normalized total power dissipation as a function of mounting base temperature.
Fig 2. Normalized continuous drain current as a function of mounting base temperature.
103 ID (A) 102
03ac65
RDSon = VDS/ ID tp = 100 s 1 ms
103 I AS (A) 102
03ac93
10 ms 10
P
25 oC
D.C.
=
tp T
100 ms
10
Tj prior to avalance = 150 oC
1
tp T t
10-1 1
10
102
VDS (V)
103
1 10-2 10-1 1 tp (ms) 10
Tmb = 25 C; IDM is single pulse
Unclamped inductive load; VDD 15 V; RGS = 50 ; VGS = 10 V; starting Tj = 25 C and 150 C.
Fig 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage.
Fig 4. Non-repetitive avalanche ruggedness current as a function of pulse duration.
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
3 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
7. Thermal characteristics
Table 4: Symbol Rth(j-mb) Rth(j-amb) Thermal characteristics Parameter Conditions Value 0.65 60 50 Unit K/W K/W K/W thermal resistance from junction to mounting Figure 5 base thermal resistance from junction to ambient SOT78 package; vertical in still air SOT404 package; mounted on printed circuit board; minimum footprint.
7.1 Transient thermal impedance
1 Zth(j-mb) (K/W) 10-1 0.05 0.02 10-2 single pulse tp T 10-3 10-5 10-4 10-3 10-2 10-1 tp (s) 1 t P d= tp T = 0.5 0.2 0.1
03ac94
Fig 5. Transient thermal impedance from junction to mounting base as a function of pulse duration.
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
4 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
8. Characteristics
Table 5: Characteristics Tj = 25 C unless otherwise specified Symbol V(BR)DSS VGS(th) Parameter drain-source breakdown voltage Conditions ID = 250 A; VGS = 0 V Min 75 Typ 90 Max - Unit V Static characteristics
gate-source threshold voltage ID = 1 mA; VDS = VGS; Figure 10 Tj = 25 C Tj = 175 C 2 1 - - - 3 - 0.05 - 4 4 - 10 500 100 V V A A nA
IDSS
drain-source leakage current
VGS = 0 V; VDS = 75 V Tj = 25 C Tj = 175 C
IGSS RDSon
gate-source leakage current drain-source on-state resistance
VDS = 0 V; VGS = 20 V VGS = 10 V; ID = 25 A; Figure 8 and 9 Tj = 25 oC Tj = 175 C
- - - - - - - - - - - -
7.9 - 115 21 50 4.7 760 400 18 80 170 100 0.8 80 227
8.5 20 - - - - - - - - - - 1.2 - -
m m nC nC nC nF pF pF ns ns ns ns V ns nC
Dynamic characteristics Qg(tot) Qgs Qgd Ciss Coss Crss td(on) tr td(off) tf VSD trr Qr total gate charge gate-source charge gate-drain (Miller) charge input capacitance output capacitance reverse transfer capacitance turn-on delay time turn-off rise time turn-off delay time turn-off fall time source-drain (diode forward) voltage reverse recovery time recovered charge IS = 25 A; VGS = 0 V; Figure 14 IS = 5 A; dIS/dt = -100 A/s; VGS = 0 V; VR = 30 V VDD = 37.5 V; RD = 1.5 ; VGS = 10 V; RG = 10 VGS = 0 V; VDS = 25 V; f = 1 MHz; Figure 13 ID = 75 A; VDS = 60 V; VGS = 10 V; Figure 15
Source-drain diode - - -
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
5 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
100 ID (A) 90 80 70 60 50
03ac64
Tj = 25 oC
100
03ac67
VGS = 6.0 V
ID (A) 90 80
VDS > ID X RDSon
5.0 V
70 60 50
4.5 V
40 30 20 10 0 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 40
Tj = 150 oC
4.3 V 4.1 V 3.9 V
30 20 10 0 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 5.5 6
Tj = 25 oC
VDS (V)
VGS (V)
Tj = 25 C
Tj = 25 C and 175 C; VDS > ID x RDSon
Fig 6. Output characteristics: drain current as a function of drain-source voltage; typical values.
03ac66
Fig 7. Transfer characteristics: drain current as a function of gate-source voltage; typical values.
03aa29
0.1 R DSon 0.09 () 0.08 0.07 0.06 0.05 0.04 0.03 0.02 0.01 0 0 10 20 30 40 50 60 70 80 4.5 V 3.9 V 4.1 V 4.3 V
Tj = 25 oC
3 a 2.8 2.6 2.4 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 -60 -20 20 60 100 140 180 Tj (oC)
VGS = 10 V 5.0 V
90 100
I D (A)
Tj = 25 C
R DSon a = --------------------------R
DSon ( 25 C )
Fig 8. Drain-source on-state resistance as a function of drain current; typical values.
Fig 9. Normalized drain-source on-state resistance factor as a function of junction temperature.
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
6 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
5
VGS(th) (V)
03aa32
10-1
ID (A)
03aa35
4.5 4 3.5 3 2.5 2 1.5 1 0.5 0 -60 -20 20 60 100 140 Tj (oC) 180
min typ. max.
10-2
10-3 min 10-4 typ max
10-5
10-6 0 1 2 3 4 VGS (V) 5
ID = 1 mA; VDS = VGS
Tj = 25 C; VDS = 5 V
Fig 10. Gate-source threshold voltage as a function of junction temperature.
100 gfs (S) 90 80 70 60 50 40 30 20 175 oC VDS > ID X RDSon Tj = 25 oC
03ac71
Fig 11. Sub-threshold drain current as a function of gate-source voltage.
104 Ciss, Coss, Crss (pF)
03ac68
Ciss
103
Coss
Crss 10 0 0 10 20 30 40 50 60 70 80 90 100 ID (A)
102
10-1
1
10 VDS (V)
10 2
Tj = 25 C and 175 C; VDS > ID x RDSon
VGS = 0 V; f = 1 MHz
Fig 12. Forward transconductance as a function of drain current; typical values.
Fig 13. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values.
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
7 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
50 IS 45 (A) 40 35 30 25 20 15 10 5 0 0 VGS = 0 V 175 oC
03ac70
15 VGS 14 ( V ) 13 12 11 10 9 8 7 6 5 4 3
!=?$'
ID = 75 A o Tj = 25 C
V
DS
= 15 V
VDS = 60 V
Tj = 25 oC 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 VSD (V)
2 1 0 0 10 20 30 40 50 60 70 80 90 100 QG (nC)
Tj = 25 C and 175 C; VGS = 0 V
ID = 75 A; VDS = 15 V and 60 V
Fig 14. Source (diode forward) current as a function of source-drain (diode forward) voltage; typical values.
Fig 15. Gate-source voltage as a function of gate charge; typical values.
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
8 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
9. Package outline
Plastic single-ended package; heatsink mounted; 1 mounting hole; 3-lead TO-220AB SOT78
E P
A A1 q
D1
mounting base
D
L2(1)
L1 Q
L
b1
1
2
3
b c
e
e
0
5 scale
10 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 4.5 4.1 A1 1.39 1.27 b 0.9 0.7 b1 1.3 1.0 c 0.7 0.4 D 15.8 15.2 D1 6.4 5.9 E 10.3 9.7 e 2.54 L 15.0 13.5 L1 3.30 2.79 L2 max. 3.0
(1)
P 3.8 3.6
q 3.0 2.7
Q 2.6 2.2
Note 1. Terminals in this zone are not tinned. OUTLINE VERSION SOT78 REFERENCES IEC JEDEC 3-lead TO-220AB EIAJ SC-46 EUROPEAN PROJECTION ISSUE DATE 99-09-13 00-09-07
Fig 16. SOT78
9397 750 07495 (c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
9 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
Plastic single-ended surface mounted package (Philips version of D2-PAK); 3 leads (one lead cropped)
SOT404
A E A1 mounting base
D1
D
HD
2
Lp
1
3
b c Q
e
e
0
2.5 scale
5 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 4.50 4.10 A1 1.40 1.27 b 0.85 0.60 c 0.64 0.46 D max. 11 D1 1.60 1.20 E 10.30 9.70 e 2.54 Lp 2.90 2.10 HD 15.40 14.80 Q 2.60 2.20
OUTLINE VERSION SOT404
REFERENCES IEC JEDEC EIAJ
EUROPEAN PROJECTION
ISSUE DATE 98-12-14 99-06-25
Fig 17. SOT404 (D2-PAK).
9397 750 07495 (c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
10 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
10. Revision history
Table 6: 01 Revision history CPCN Description Product specification.
Rev Date 20000918
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
11 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
11. Data sheet status
Datasheet status Objective specification Preliminary specification Product status Development Qualification Definition [1] This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Product specification
Production
[1]
Please consult the most recently issued data sheet before initiating or completing a design.
12. Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
13. Disclaimers
Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
9397 750 07495
(c) Philips Electronics N.V. 2000 All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
12 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
Philips Semiconductors - a worldwide company
Argentina: see South America Australia: Tel. +61 2 9704 8141, Fax. +61 2 9704 8139 Austria: Tel. +43 160 101, Fax. +43 160 101 1210 Belarus: Tel. +375 17 220 0733, Fax. +375 17 220 0773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Tel. +359 268 9211, Fax. +359 268 9102 Canada: Tel. +1 800 234 7381 China/Hong Kong: Tel. +852 2 319 7888, Fax. +852 2 319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Tel. +45 3 288 2636, Fax. +45 3 157 0044 Finland: Tel. +358 961 5800, Fax. +358 96 158 0920 France: Tel. +33 14 099 6161, Fax. +33 14 099 6427 Germany: Tel. +49 40 23 5360, Fax. +49 402 353 6300 Hungary: see Austria India: Tel. +91 22 493 8541, Fax. +91 22 493 8722 Indonesia: see Singapore Ireland: Tel. +353 17 64 0000, Fax. +353 17 64 0200 Israel: Tel. +972 36 45 0444, Fax. +972 36 49 1007 Italy: Tel. +39 039 203 6838, Fax +39 039 203 6800 Japan: Tel. +81 33 740 5130, Fax. +81 3 3740 5057 Korea: Tel. +82 27 09 1412, Fax. +82 27 09 1415 Malaysia: Tel. +60 37 50 5214, Fax. +60 37 57 4880 Mexico: Tel. +9-5 800 234 7381 Middle East: see Italy Netherlands: Tel. +31 40 278 2785, Fax. +31 40 278 8399 New Zealand: Tel. +64 98 49 4160, Fax. +64 98 49 7811 Norway: Tel. +47 22 74 8000, Fax. +47 22 74 8341 Philippines: Tel. +63 28 16 6380, Fax. +63 28 17 3474 Poland: Tel. +48 22 5710 000, Fax. +48 22 5710 001 Portugal: see Spain Romania: see Italy Russia: Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: Tel. +27 11 471 5401, Fax. +27 11 471 5398 South America: Tel. +55 11 821 2333, Fax. +55 11 829 1849 Spain: Tel. +34 33 01 6312, Fax. +34 33 01 4107 Sweden: Tel. +46 86 32 2000, Fax. +46 86 32 2745 Switzerland: Tel. +41 14 88 2686, Fax. +41 14 81 7730 Taiwan: Tel. +886 22 134 2451, Fax. +886 22 134 2874 Thailand: Tel. +66 23 61 7910, Fax. +66 23 98 3447 Turkey: Tel. +90 216 522 1500, Fax. +90 216 522 1813 Ukraine: Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Tel. +44 208 730 5000, Fax. +44 208 754 8421 United States: Tel. +1 800 234 7381 Uruguay: see South America Vietnam: see Singapore Yugoslavia: Tel. +381 11 3341 299, Fax. +381 11 3342 553
For all other countries apply to: Philips Semiconductors, Marketing Communications, Building BE, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 272 4825
Internet: http://www.semiconductors.philips.com
(SCA70)
9397 750 07495
(c) Philips Electronics N.V. 2000. All rights reserved.
Product specification
Rev. 01 -- 18 September 2000
13 of 14
Philips Semiconductors
PSMN008-75P; PSMN008-75B
N-channel enhancement mode field-effect transistor
Contents
1 2 3 4 5 6 7 7.1 8 9 10 11 12 13 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Transient thermal impedance . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 12 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
(c) Philips Electronics N.V. 2000.
Printed in The Netherlands
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 18 September 2000 Document order number: 9397 750 07495

▲Up To Search▲

Price & Availability of PSMN008-75P

	To Download PSMN008-75P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .